Original Jager Charger For 48V & 60V Battery Systems | UL Certified
Original Jager Charger | UL Certified | For 48V & 60V Battery Systems
OEM Replacement Part | Available in Two Voltage Options
Direct OEM replacement charger for Jager electric scooters. UL certified and calibrated specifically for your battery system — automatically stopping the charge cycle when the battery reaches full capacity.
Compatible Models:
• Jager MOXO 48V
• Jager HUNTER 48V
• Jager MOXO Pro 60V
• Jager HUNTER Pro 60V
Key Details:
• Input: 110V AC
• Output: 67.2V / 2.0A for MOXO Pro and Hunter Pro 60V batteries
• Output: 54.6V / 2.0A for MOXO and Hunter 48V batteries
• Compatible Battery: 48V, 60V lithium-ion
• Certification: UL Listed
• Spec: OEM factory replacement
• Quantity: 1 unit
Before You Buy — Check Your Charger Model
Make sure you are ordering the correct voltage variant for your scooter. There are three easy ways to confirm:
1. Check the sticker on your scooter — the model label is located on the scooter frame and will indicate your battery voltage
2. Read your owner’s manual — the charger specifications are listed in the manual that came with your scooter
3. Check the back of your existing charger — the output voltage is printed on the label on the rear of the charger housing
⚠️ Ordering the wrong voltage charger can damage your battery and is a serious safety risk. When in doubt — contact us before purchasing.
⚠️ Critical Safety Warning — Read Before Use
Use Only the Original Certified Charger!
This charger is designed and calibrated specifically for the 48V or 60V battery system in your Jager scooters. Never use an aftermarket, third-party, or uncertified charger — even if the connector fits. An incompatible charger may not communicate correctly with the battery management system (BMS), leading to dangerous and uncontrolled charging.
Non-Original Chargers Can Cause:
• Fire — due to overcharging or thermal runaway
• Short circuit — from incorrect voltage or amperage output
• Continuous charging loop — charger fails to cut off when battery is full, causing overheating and potential fire
• Permanent battery damage and voided warranty
Never leave your scooter charging unattended overnight or for extended periods with a non-original charger. The consequences can be severe.
⚠️Designed specifically for Jager scooters. Please confirm your model before ordering. Questions? Contact us — we’ll help.
Information tag
Tell more about your product, add care instructions, country of origin, or manufacturer information.
Original Jager Charger | UL Certified | For 48V & 60V Battery Systems
OEM Replacement Part | Available in Two Voltage Options
Direct OEM replacement charger for Jager electric scooters. UL certified and calibrated specifically for your battery system — automatically stopping the charge cycle when the battery reaches full capacity.
Compatible Models:
• Jager MOXO 48V
• Jager HUNTER 48V
• Jager MOXO Pro 60V
• Jager HUNTER Pro 60V
Key Details:
• Input: 110V AC
• Output: 67.2V / 2.0A for MOXO Pro and Hunter Pro 60V batteries
• Output: 54.6V / 2.0A for MOXO and Hunter 48V batteries
• Compatible Battery: 48V, 60V lithium-ion
• Certification: UL Listed
• Spec: OEM factory replacement
• Quantity: 1 unit
Before You Buy — Check Your Charger Model
Make sure you are ordering the correct voltage variant for your scooter. There are three easy ways to confirm:
1. Check the sticker on your scooter — the model label is located on the scooter frame and will indicate your battery voltage
2. Read your owner’s manual — the charger specifications are listed in the manual that came with your scooter
3. Check the back of your existing charger — the output voltage is printed on the label on the rear of the charger housing
⚠️ Ordering the wrong voltage charger can damage your battery and is a serious safety risk. When in doubt — contact us before purchasing.
⚠️ Critical Safety Warning — Read Before Use
Use Only the Original Certified Charger!
This charger is designed and calibrated specifically for the 48V or 60V battery system in your Jager scooters. Never use an aftermarket, third-party, or uncertified charger — even if the connector fits. An incompatible charger may not communicate correctly with the battery management system (BMS), leading to dangerous and uncontrolled charging.
Non-Original Chargers Can Cause:
• Fire — due to overcharging or thermal runaway
• Short circuit — from incorrect voltage or amperage output
• Continuous charging loop — charger fails to cut off when battery is full, causing overheating and potential fire
• Permanent battery damage and voided warranty
Never leave your scooter charging unattended overnight or for extended periods with a non-original charger. The consequences can be severe.
⚠️Designed specifically for Jager scooters. Please confirm your model before ordering. Questions? Contact us — we’ll help.
